12 volt battery charging indicator, Hr robotics

-

Circuit diagram for 12 volt battery charging indicator

Required need
1. Female charging pin
2.1k resistance
3.diode 1n4007
4.12 volt 2ampere adapter
5.12 volt battery

Comments

  1. AnonymousNovember 23, 2020 at 12:49 AM

    You are best aap bhi please mujhe bhi comment kare please

    ReplyDelete

Post a Comment

Popular posts from this blog

Ir sensor and servo motor programming, hr robotics

-
Image
Coding to program servo and ir sensor #include <Servo.h> const int analogInPin = A0;  int sensorValue = 0;                int servoPin = 9; int i = 0; Servo servo; void setup() {   servo.attach(servoPin); } void loop() {     sensorValue = analogRead(analogInPin);                if(sensorValue < 600){     for (int i = 0; i<=180; i++){     servo.write(i);     delay(10);    }   }   servo.write(i);                        }
Read more

Ultrasonic sensor and led programming

-
Image
code- #define trigPin 11 #define echoPin 12 #define led 13 void setup() { Serial.begin (9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); pinMode(led, OUTPUT); } void loop() { long duration, distance; digitalWrite(trigPin, LOW); delayMicroseconds(2); digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); duration = pulseIn(echoPin, HIGH); distance = (duration/2) / 29.1; if (distance < 10) { digitalWrite(led,HIGH); } else { digitalWrite(led,LOW); } Serial.print(distance); Serial.println(" cm"); delay(500); }
Read more